Ensemble Designs BrightEye 3 Analog to SDI Converter with TBC and Frame Sync User Manual
Page 14
BrightEye 3 Analog to SDI Converter with TBC/FS
SPECIFICATIONS
Analog Input:
Number:
One
Type:
Beta/SMPTE, Y, Pr, Pb
NTSC, PAL Composite
NTSC, PAL S-Video
Impedance:
75 Ω
Return Loss:
> 40 dB
Input DC:
+/- 1 volt DC
Input Hum:
< 100 mV
Serial Digital Output:
Number:
One
Type:
270Mb/s SD Serial digital
(SMPTE 259M)
Impedance:
75 Ω
Return Loss:
> 15 dB
Output DC:
None (AC coupled)
Analog to SDI Performance:
Bit Resolution:
12 bit input quantization
4 X oversampling
Signal to Noise:
> 62 dB, weighted
Frequency Response:
Composite and Y
± 0.1 dB, 0 to 5.5 MHz
Pr, Pb
± 0.1 dB, 0 to 2.75 MHz
Minimum Delay:
90 µSec
Reference Input:
Number:
One
Type:
1 V p-p Composite Video
PAL or NTSC
Impedance:
75 Ω
Return Loss:
> 40 dB
General Specifications:
Size:
5.625” W x 0.8 “ H x 5.5” D
(143 mm x 20 mm x 140 mm)
including connectors
Power:
12 volts, 7 watts
Temperature Range:
0 to 40 degrees C ambient
Relative Humidity:
0 to 95% noncondensing
Due to ongoing product development, all specifications are subject to change.
BrightEye-14