Ensemble Designs BrightEye 54 Sync Generator and Test Signal Generator - Manual (Page 7)

TM
BrightEye 54
BrightEye 54 - Page 7
Power Connection
Connect a modular power supply to the 12 volt DC power input connection on the
far left of the unit. Use the locking ring to secure it.
USB Connector
The USB connector is used to provide more comprehensive control, diagnostics,
and upgrades to the unit from a PC or Mac. Use the BrightEye Control applica-
tion included on CD-ROM to make adjustments as described in the
OPERATION
section of this user guide.
AES Out
The AES Out is a BNC connector that provides a digital audio output in the AES
format. The AES Output can be configured from the front panel and from the
BrightEye Control application.
HD Tri Level Sync Out
The HD Sync Out is a BNC connector that supplies HD Tri Level Sync in a
number of user-selected formats. Either the front panel or the BrightEye PC or
Mac can be used to select the desired format.
SDI Out
The SDI Out is a BNC connector that provides test patterns or black in serial
digital component format. Test patterns and video standard can be selected from
the front panel as well as the BrightEye Control application. This output
conforms to the ITU-R 601 standard for serial digital video, with SMPTE 259M
serialization at 270 Mb/s.
Analog Audio Out
The Analog Audio Out is a HD15 connector that can provide analog audio
reference tone. Analog reference levels can be configured from the BrightEye
Control application.
Composite Out
The Composite Out is a BNC connector that presents either NTSC or PAL
composite output. This output provides the same test pattern as SDI Out, only in
composite format. The pattern can be selected from the front panel or the
BrightEye Control application.
Analog Audio Pinouts
Signal Pins Output
Aud 1 +, –, G 1, 2, 7 Output 1
Aud 2 +, –, G 5, 4, 3 Output 2
1
6
+ + - -
11
AUD 2 AUD 1