Ensemble Designs BrightEye 5 Analog Composite TBC and Frame Sync - Manual (Page 9)

www.ensembledesigns.com BrightEye 5 - Page 9
5 Analog Composite TBC and Frame Sync User Guide
Operation
Control and operation of the BrightEye 5 is performed from the front panel or remotely from a
networked PC with the BrightEye Mac/PC Control application software.
Note: Some control settings are only available with BrightEye PC or Mac. These parameters
cannot be monitored or controlled from the front panel.
Front Panel Controls and Indicators
The front panel of the converter, shown in the figure below, provides status and control indicators for
adjusting parameters from the front panel.
BrightEye 5 Front Panel
Status Indicators
• In (Input) – Illuminates green when a valid input is detected on the Cpst In BNC connector.
• Ref (Reference) – Illuminates green when a valid NTSC or PAL reference is detected on the
Ref In BNC connector.
Note: A reference is not required for operation.
• Pwr (Power) – The power indicator illuminates green when the BrightEye unit has power and
the internal voltage regulator is functioning correctly.