H3C Technologies H3C S6800 Series Switches - Manual (Page 14)

10
Installing and removing an interface
card
CAUTION:
•
Before you install or remove an interface card, wear an ESD wrist
strap and make sure the strap makes good skin contact and is
reliably grounded.
• To avoid device damage, do not use excessive force when you
install or remove an interface card.
The installation and removal procedures are the same for the
LSWM124XG2Q and LSWM124XG2QL interface cards. This section
uses the LSWM124XG2Q interface card as an example.
Installing an interface card
Before you install an interface card, remove the filler panel (if any) from
the target slot. Keep the removed filler panel secure for future use.
To install an interface card:
1. Unpack the interface card.