Verifying the installation – H3C Technologies H3C S6800 Series Switches User Manual
Page 17
Advertising
13
Figure 4 Removing an interface card
Installing and removing SFP, SFP+, and QSFP+
transceiver modules and DAC cables
For information about installing and removing SFP/SFP+ transceiver
modules and SFP+ DAC cables, see H3C SFP/SFP+/XFP Transceiver
Modules Installation Guide at www.h3c.com.
For information about installing and removing QSFP+ transceiver
modules and DAC cables, see H3C QSFP+ Transceiver
Modules/Cables Installation Guide
at www.h3c.com.
Verifying the installation
After the installation is complete, identify whether the interface card is
operating correctly.
If the interface card fails to operate correctly, perform the following
steps:
Advertising