H3C Technologies H3C S5800 Series Switches - Manual (Page 11)

11
Applicable switches
Applicable DC
inputs
Cables
• S5500-28C-PWR-EI
• S5500-52C-PWR-EI
RPS DC interface 0404A053
S5500-28C-EI-DC
– 48 VDC through –
60 VDC interface
0404A053
S5500-EI series
S5500-28F-EI (uses PSR150-D)
– 48 VDC through –
60 VDC interface
0404A055
Use a JD5 connector (a
little bigger than the
JD5-A) at the RPS end,
and a JD5-A connector
at the switch end.
• S5600-26C
• S5600-50C
• S5600-26F
– 48 VDC through –
60 VDC interface
0404A053
S5600 series
• S5600-26C-PWR
• S5600-50C-PWR
RPS DC interface 0404A053
• S5800-32C-PWR
• S5800-56C-PWR
RPS DC interface 0404A053
S5800-32F (uses PSR150-D)
– 48 VDC through –
60 VDC interface
0404A055
Use a JD5 connector (a
little bigger than the
JD5-A) at the RPS end,
and a JD5-A connector
at the switch end.
S5800-60C-PWR (uses
PSR300-12D1) – 48 VDC through –
60 VDC interface
0404A053
S5800 series
S5800-60C-PWR (uses PSR750-D,
and RPS1000-A3 that requires full
configuration, that is, two
AD162M56-1M1 power modules)
– 48 VDC through –
60 VDC interface
0404A0A1
S5810 series S5810-50S (uses PSR300-12D1)
– 48 VDC through –
60 VDC interface
0404A053
S5820X series
• S5820X-28S (uses PSR300-12D1)
• S5820X-28C (uses
PSR300-12D1)
– 48 VDC through –
60 VDC interface
0404A053
NOTE:
The models of H3C low-end Ethernet switches supported by the RPS units are subject to changes without
prior notice. For the up-to-date information, consult H3C marketing or technical support staff.
Copyright © 2008-2011 Hangzhou H3C Technologies Co., Ltd. All rights reserved.
No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Hangzhou H3C Technologies Co.,
Ltd.
The information in this document is subject to change without notice.