H3C Technologies H3C S5800 Series Switches - Manual (Page 9)

9
Applicable switches
Applicable DC
inputs
Cables
S5800-60C-PWR (uses
PSR300-12D1) – 48 VDC through –
60 VDC interface
0404A053
S5800-60C-PWR (uses PSR750-D,
and RPS1600-A that requires full
configuration, that is, two
AD162M56-1M1 power modules)
– 48 VDC through –
60 VDC interface
0404A0A1
S5810 series S5810-50S (uses PSR300-12D1)
– 48 VDC through –
60 VDC interface
0404A053
S5820X series
• S5820X-28S (uses PSR300-12D1)
• S5820X-28C (uses
PSR300-12D1)
– 48 VDC through –
60 VDC interface
0404A053
Ordering Information for RPS1000-A3
NOTE:
The RPS1000-A3 is phased out, so H3C recommends you to select the RPS1600-A as a substitution.
Table 7 Support matrix between the RPS1000-A3, switch and DC power cables
Applicable switches
Applicable DC
inputs
Cables
Applicable switches of the RPS1000-A3 -54V/8A outputs
S3600 series
• S3600-28P-EI
• S3600-52P-EI
• S3600-28F-EI
– 48 VDC through –
60 VDC interface
0404A054
S3610 series
• S3610-28P
• S3610-28TP
• S3610-28F
• S3610-52P
– 48 VDC through –
60 VDC interface
0404A054
S5100 series
• S5100-26C-EI
• S5100-50C-EI
• S5100-24P-EI
• S5100-48P-EI
– 48 VDC through –
60 VDC interface
0404A054
S5500-28C-EI-DC
– 48 VDC through –
60 VDC interface
0404A055
Use a JD5-A connector
at the RPS end, and a
JD5 connector (a little
bigger than the JD5-A)
at the switch end.
S5500-EI series
S5500-28F-EI (uses PSR150-D)
– 48 VDC through –
60 VDC interface
0404A054