H3C Technologies H3C MSR 5600 - Manual (Page 74)

64
Enabling private line auto ring-down
The private line auto ring-down (PLAR) function enables a subscriber line to automatically call the
specified called number when the phone goes off-hook.
To configure the PLAR function:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter subscriber line view. subscriber-line line-number N/A
3. Configure PLAR. private-line string By default, PLAR is not configured.
Configuring a number match mode
Two number match modes are available: longest match and shortest match.
Suppose you have configured match-template 0106688 on a voice entity and match-template
01066880011 on another voice entity.
When a subscriber dials 01066880011:
• If shortest match is used, the router matches and calls the number 0106688.
• If longest match is used, the router matches and calls the number 01066880011.
When a subscriber dials 0106688:
• If shortest match is used, the router immediately matches and calls the number 0106688.
• If longest match is used, the router waits until the dial timer expires. Then the router matches the
received number against match templates. If a match is found, the router calls the matching number.
If no match is found, the router releases the call.
You can configure a terminator that identifies the end of a number. Suppose the terminator is the pound
sign #. When a subscriber dials 0106688#, the router immediately matches the number 0106688 with
match templates regardless of whether longest match is used. If a match is found, the router calls the
matching number.
Procedure
To configure a number match mode:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter voice view. voice-setup N/A
3. Enter dial program view. dial-program N/A
4. Configure a number match
mode. number-match { longest |
shortest }
By default, shortest match is used.
5. Configure a terminator. terminator character
By default, no terminator is
configured.