H3C Technologies H3C MSR 3600 - Manual (Page 19)

11
To mount the router on a workbench:
1. Make sure the workbench is clean, stable, and correctly grounded.
2. Place the router upside down on the workbench and attach the rubber feet to the four round holes
in the chassis bottom.
Figure 6 Attaching the rubber feet
3. Place the router on the workbench with the upside up.
Figure 7 Mounting the router on a workbench
Installing the router in a rack
Mounting brackets
Only front mounting bracket are required to rack-mount the MSR3600-28/3600-51 router. Both front and
rear mounting brackets are required to rack-mount the MSR 36-10/36-20/36-40/36-60 router.
The front mounting brackets vary depending on the router model, as shown in
Figure 8 .
Figure 8 Front mounting brackets