H3C Technologies H3C MSR 20-1X - Manual (Page 26)

19
Installing the Router on a Wall
In addition, you can install MSR 20-1X routers on a cement wall or wood wall.
Figure 13 and Figure 14 show the recommended sizes (in mm) of the screw and anchor for
wall-mounting.
Figure 13 Screw sizes
16.00
+0.5
-0.0
1.40
6.50
+
-
+
-
0.2
0.5
60
。
3.
5
Figure 14 Anchor sizes
A
B
3.7
C
21.8
The wall-mounting procedure is as follows (see Figure 15 ):
Step1 Drill two holes in the wall, with the two holes on the same horizontal line and a distance of 170 mm (6.69
in.) between them.
Step2 Insert an anchor into each hole.
Step3 Drive the screws into the anchors, keeping the screws at least 1.5 mm (0.06 in.) outside the wall.