H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 31)

24
Configuring primap
By configuring a primap behavior and associating it with a traffic class, you can re-assign priority
parameters for the traffic class according to the specified priority mapping table.
Configuring uncolored primap
Follow these steps to configure primap:
To do… Use the command… Remarks
Enter system view system-view —
Create a class and enter class view traffic classifier tcl-name [ operator { and | or } ] —
Configure match criteria If-match match-criteria —
Return to system view quit —
Create a traffic behavior and enter
traffic behavior view
traffic behavior behavior-name —
Configure the action of assigning
priority values to packets using a
specified priority mapping table
primap pre-defined { dscp-dot1p | dscp-dp |
dscp-dscp | dscp-lp }
Required
Return to system view quit —
Create a policy and enter policy view qos policy policy-name —
Associate the traffic behavior with the
class
classifier tcl-name behavior behavior-name —
Return to system view quit —
Apply the QoS
policy
To an interface Applying the QoS policy to an interface —
To online users Applying the QoS policy to online users —
To a VLAN Applying the QoS policy to a VLAN —
Globally Applying the QoS policy globally —
Displaying and maintaining priority mapping
To do… Use the command… Remarks
Display priority mapping table
configuration
display qos map-table [dot1p-dot1p |
dot1p-dscp | dot1p-lp | dscp-dot1p |
dscp-dscp | dscp-lp ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display the trusted packet priority
type on a port
display qos trust interface [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
Available in any view