H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 48)

41
Configuration example
1. Network requirements
Configure SP+WRR queuing on interface GigabitEthernet 1/0/1 as follows:
• Assign queue 0 to the SP scheduling group.
• Assign queue 1 to WRR scheduling group 1, with the weight of 20.
• Assign queues 2 and 3 to WRR scheduling group 2, with the weight of 10 and 50.
2. Configuration procedure
# Enter system view.
<Sysname> system-view
# Configure SP+WRR queuing on interface GigabitEthernet 1/0/1.
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wrr 0 group sp
[Sysname-GigabitEthernet1/0/1] qos wrr 1 group 1 weight 20
[Sysname-GigabitEthernet1/0/1] qos wrr 2 group 2 weight 10
[Sysname-GigabitEthernet1/0/1] qos wrr 3 group 2 weight 50