Document Outline

• Title Page
• Preface
  • Audience
  • Conventions
    • Command conventions
    • GUI conventions
    • Symbols
    • Network topology icons
    • Port numbering in examples
  • About the H3C WA series access points documentation set
  • Obtaining documentation
  • Technical support
  • Documentation feedback
• Contents
• System maintenance and debugging
  • Ping
    • Using a ping command to test network connectivity
    • Ping example
      • Network requirements
      • Configuration procedure
  • Tracert
    • Prerequisites
    • Using a tracert command to identify failed or all nodes in a path
  • System debugging
    • Debugging information control switches
    • Debugging a feature module
  • Ping and tracert example
    • Network requirements
    • Configuration procedure
• NTP configuration
  • NTP overview
    • NTP application
    • NTP advantages
    • How NTP works
    • NTP message format
    • NTP operation modes
      • Client/server mode
      • Symmetric peers mode
      • Broadcast mode
      • Multicast mode
  • NTP configuration task list
  • Configuring NTP operation modes
    • Configuring NTP client/server mode
    • Configuring the NTP symmetric peers mode
    • Configuring NTP broadcast mode
      • Configuring a broadcast client
      • Configuring the broadcast server
    • Configuring NTP multicast mode
      • Configuring a multicast client
      • Configuring the multicast server
  • Configuring optional parameters for NTP
    • Specifying the source interface for NTP messages
    • Disabling an interface from receiving NTP messages
    • Configuring the allowed maximum number of dynamic sessions
  • Configuring access-control rights
    • Configuration prerequisites
    • Configuration procedure
  • Configuring NTP authentication
    • Configuration prerequisites
    • Configuration procedure
  • Displaying and maintaining NTP
  • NTP configuration examples
    • Configuring NTP client/server mode
      • Network requirements
      • Configuration procedure
    • Configuring NTP broadcast mode
      • Network requirements
      • Configuration procedure
    • Configuring NTP multicast mode
      • Network requirements
      • Configuration procedure
    • Configuring NTP client/server mode with authentication
      • Network requirements
      • Configuration procedure
    • Configuring NTP broadcast mode with authentication
      • Network requirements
      • Configuration procedure
• SNMP configuration
  • SNMP overview
    • SNMP framework
    • SNMP protocol versions
  • Configuring basic SNMP settings
    • Configuring basic SNMPv3 settings
    • Configuring basic SNMPv1 and SNMPv2c settings
  • Configuring SNMP logging
    • Enabling SNMP logging
  • Configuring SNMP traps
    • Enabling SNMP traps
    • Configuring the SNMP agent to send traps to a host
  • Displaying and maintaining SNMP
  • SNMP configuration examples
    • SNMPv1/SNMPv2c configuration example
      • Network requirements
      • Configuration procedure
    • SNMPv3 configuration example
      • Network requirements
      • Configuration procedure
    • SNMP logging configuration example
      • Network requirements
      • Configuration procedure
• MIB style configuration
  • Overview
  • Setting the MIB style
  • Displaying and maintaining MIB style
• CWMP (TR-069) configuration
  • CWMP (TR-069) overview
    • CWMP network framework
    • Basic CWMP functions
      • Autoconnection between ACS and CPE
      • Autoconfiguration
      • CPE system software image file and configuration file management
      • CPE status and performance monitoring
    • CWMP mechanism
      • RPC methods
      • How CWMP works
  • CWMP configuration approaches
    • Configuring ACS and CPE attributes through ACS
    • Configuring ACS and CPE attributes through DHCP
    • Configuring CWMP at the CLI
  • Enabling CWMP
  • Configuring ACS attributes
    • Configuring the ACS URL
    • Configuring the ACS username and password
  • Configuring CPE attributes
    • Configuring the CPE username and password
    • Configuring the CWMP connection interface
    • Sending Inform messages
    • Configuring the maximum number of attempts made to retry a connection
    • Configuring the close-wait timer of the CPE
  • Displaying and maintaining CWMP
• Information center configuration
  • Overview
    • Classification of system information
    • System information levels
    • Output channels and destinations
    • Outputting system information by source module
    • Default output rules of system information
    • System information format
      • Formats
      • PRI (priority)
      • timestamp
      • Sysname (host name or host IP address)
      • %% (vendor ID)
      • vv
      • module
      • level (severity)
      • digest
      • serial number
      • source
      • content
  • Information center configuration task list
  • Outputting system information to the console
  • Outputting system information to a monitor terminal
  • Outputting system information to a log host
  • Outputting system information to the trap buffer
  • Outputting system information to the log buffer
  • Outputting system information to the SNMP module
  • Outputting system information to the Web interface
  • Configuring synchronous information output
  • Disabling a port from generating link up/down logging information
  • Displaying and maintaining information center
  • Information Center Configuration Examples
    • Outputting Log Information to a UNIX Log Host
      • Network requirements
      • Configuration procedure
    • Outputting Log Information to a Linux Log Host
      • Network requirements
      • Configuration procedure
    • Outputting log Information to the Console
      • Network requirements
      • Configuration procedure
• Index