H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 56)

50
Appendix B LEDs
Panel LEDs
Figure 41 LEDs
(1) 100/1000Base-T autosensing Ethernet port status LEDs
(2) 100Base-FX/1000Base-X SFP port status LEDs
(3) 10GBase-R SFP+ port status LEDs
(4) 100/1000 Base-T out-of-band management Ethernet port status LEDs (LINK/ACT)
(5) Power module 1 status LED (PWR1)
(6) Power module 2 status LED (PWR2)
(7) System status LED (SYS) (8) Expansion slot status LED (MOD)
Table 27 LED description
LED Mark Status Description
Power module 1
status LED
PWR1
Steady green Power module 1 is operating correctly.
Steady yellow Power module 1 is faulty
Off No power module is installed to the slot.
Power module 2
status LED
PWR2
Steady green Power module 2 is operating correctly.
Steady yellow Power module 2 is faulty.
Off No power module is installed to the slot.
System status LED SYS
Steady green The system is starting up.
Flashing green The system is operating correctly.
Flashing green The system is downloading files.
Steady yellow
The system has failed to pass the power on self test
(POST) or has detected a serious fault.
Off No power input is present.