H3C Technologies H3C WX5000 Series Access Controllers - Manual (Page 26)

3-6
Figure 3-10 Install a tray
4) Place the access controller on the tray horizontally, gently push the access controller into the rack
along the tray, and then use screws and the corresponding cage nuts to fix the front mounting
brackets to the front square-hole rack rails of the rack, as shown in
Figure 3-11 .
Figure 3-11 Installation with front mounting brackets and a tray
Installing the Access Controller with Mounting Brackets and Slide Rails
z
Slide rails are optional components, which need to be separately ordered if needed.
z
H3C slide rails are suitable for only the H3C standard racks with a depth of 1000 mm (39.37 in.). If
the depth of your rack is different, substitute other supports for the slide rails.