Epson Power Supply S1F70000 - Manual (Page 205)

S1F70000 Series
EPSON 5–5
Technical Manual
S1F77200Y Series
S1F77200Y
Series
The following figures show the input and output characteristics of the S1F77200Y series.
[S1F772 * 0Y1 * 0 Type] S1F772 * 0Y2 * 0 Type
Note: The above input/output characteristics assumes that the pull up resistor is connected to the output pin for
the S1F77200Y series. For the S1F77220 series, it assumes that the pull down resistor is connected
between the OUT and V
DD pins.
If the input voltage that is applied between V DD and V SS terminals drops below the lower limit of voltage
for IC operation, the output condition of the OUT terminal may become unsteady.
Ensure to prevent problems from occurring in circuit operation.
ABSOLUTE MAXIMUM RATINGS
OUT
0
0 V DD (V1)
V HYS V DET : Detection voltage
V REL : Relief voltage
V REL V DET
Operating voltage
upper limit
Operating voltage
lower limit
OUT
0
0 V DD (V1)
V HYS
V DET : Detection voltage
V REL : Relief voltage
V REL V DET
Operating voltage
upper limit
Operating voltage
lower limit
Parameter Symbol Rating Unit
Supply voltage range V DD – V SS 15 V
V DD + 0.3 to V SS – 0.3
(S1F77210)
Output voltage V O
15 to V SS – 0.3
V
(S1F77200)
V DD + 0.3 to V DD – 15
(S1F77220)
Output current I O 50 mA
Allowable dissipation P D 200 mW
Operating temperature Topr –40 to +85
°
C
–30 to +85
(designed for lower voltage operation)
Storage temperature Tstg –65 to +150 ˚C
Soldering temperature
Tsol
260 · 10
˚C · s
and time (at leads)