H3C Technologies H3C SecCenter IPS Manager - Manual (Page 17)

11
Adding a device
After completing device group and template configuration, you can add devices to be managed. Only
after you add devices successfully, can you perform centralized analysis on attack, virus, and DDoS
events.
1. From the navigation tree of the system management component, select Device List under Device
Management to enter the device management page.
2. Click Add to enter the page for adding a device, as shown in Figure 10 .
3. Configure the settings. Table 10 describes the device configuration items.
4. Click Add.
Figure 10 Add a device
Table 10 Device configuration items
Item Description
Host Name/IP
Required
Type the name or IP address of the device to uniquely identify the device in
the SecCenter system.
Device Label
Required
Type a label for the device, which can be used as an alias of the device.
The device label can comprise up to 20 characters and must not contain
illegal characters.