H3C Technologies H3C SecBlade NetStream Cards - Manual (Page 215)

200
Actual frequency: 64.0000 Hz
Clock precision: 2^7
Clock offset: 0.0000 ms
Root delay: 0.00 ms
Root dispersion: 0.00 ms
Peer dispersion: 0.00 ms
Reference time: 00:00:00.000 UTC Jan 1 1900 (00000000.00000000)
# Specify Device as the NTP server of SecBlade so that SecBlade is synchronized to Device.
<SecBlade> system-view
[SecBlade] ntp-service unicast-server 1.0.1.11
# View the NTP status of SecBlade after clock synchronization.
[SecBlade] display ntp-service status
Clock status: synchronized
Clock stratum: 3
Reference clock ID: 1.0.1.12
Nominal frequency: 64.0000 Hz
Actual frequency: 64.0000 Hz
Clock precision: 2^7
Clock offset: 0.0000 ms
Root delay: 31.00 ms
Root dispersion: 1.05 ms
Peer dispersion: 7.81 ms
Reference time: 14:53:27.371 UTC Sep 19 2005 (C6D94F67.5EF9DB22)
As shown above, SecBlade has been synchronized to Device, and the clock stratum level of SecBlade is
3, while that of Device is 2.
# View the NTP session information of SecBlade, which shows that an association has been set up
between SecBlade and Device.
[SecBlade] display ntp-service sessions
source reference stra reach poll now offset delay disper
**************************************************************************
[12345] 1.0.1.12 127.127.1.0 2 63 64 3 -75.5 31.0 16.5
note: 1 source(master),2 source(peer),3 selected,4 candidate,5 configured
Total associations : 1
Configuring NTP client/server mode with authentication
Network requirements
As shown in Figure 62 , perform the following configurations to synchronize the time between SecBlade
and Device and ensure network security. More specifically:
• The local clock of Device is to be configured as a reference source, with the stratum level of 2.
• SecBlade works in client mode and Device is to be used as the NTP server of SecBlade, with
SecBlade as the client.
• NTP authentication is to be enabled on both Device and SecBlade.