How to operate your hand vac, Changing and cleaning the dust cup filter – Eureka 59 User Manual
Page 6
6
How To Operate Your Hand Vac
CAUTION: The hand vac is a very powerful unit. Make sure that you hold it firmly,
otherwise it can slip out of your hand and cause injury.
1. Hold the hand vac firmly with your hand on
handle.
2. Push the On (-) Off (0) power switch to “On (-)”
position.
3. Start vacuuming.
Changing And Cleaning The Dust Cup Filter
CAUTION: Always unplug from electrical outlet before opening the dust cup.
1. To open the dust cup, push release button and pull off the dust cup.
2. Pull out the dust cup filter (Fig. 2).
3. Empty the dust from the dust cup and shake filter.
4. Occasionally rinse the dust cup filter in cold water. Then wait until it dries
completely before replacing it into the dust cup.
5. Place the dust cup filter firmly into the dust cup.
6. Attach the dust cup to the hand vac.
CAUTION: Adequate airflow must be maintained at all times through the cleaner.
Any obstructions will cause the motor to overheat resulting in
permanent damage.
Release
Button
Dust Cup
Filter
2
NOTE:
Dust cup filter must be used when
operating the hand vac.