Manual backup, Manual restore – H3C Technologies H3C Intelligent Management Center User Manual
Page 91
84
Figure 67 Command Prompt window
3.
To stop DBMan, execute the following commands in the Command Prompt window:
D:
cd Program Files\dbman\bin\
dbman -k
Manual backup
Manual backup allows you to manually back up all data files on the database server immediately.
To perform a manual backup:
1.
Start the Intelligent Deployment Monitoring Agent on the server where IMC is deployed.
2.
Click the Environment tab.
3.
Click Backup.
A confirmation dialog box appears.
4.
Click OK.
The Select database backup path dialog box appears.
5.
Select the backup file save path.
Make sure the path resides on a local disk that has sufficient free space. Otherwise, backup fails.
6.
Click OK.
DBMan starts to back up all databases used by the IMC system to the specified path.
Manual restore
CAUTION:
H3C recommends you restore database files for the IMC Platform and deployed components together. If
you restore only some of them, data loss or inconsistency might occur.
Manual restoration allows you to restore the IMC database files to the files of the specified time point.
Make sure IMC is started at least once after installation and the backup database files exist.