H3C Technologies H3C SecPath M9000 Series - Manual (Page 68)

60
Table 30 100-Gigabit CFP module specifications
100-Gigabit CFP module
Central
wavelength
Connector
Cable
specifications
Maximum
transmission
distance
CFP-100G-LR4-WDM1300
• 1295.56 nm
• 1300.05 nm
• 1304.58 nm
• 1309.14 nm
LC
9/125 μm
single-mode fiber 10 km (6.21
miles)
DC power cable
DC power cables are used for connecting the DC power modules of an M9000 gateway to the external
DC power supply system.
Table 31 DC power cable specifications
DC power cable Cable length Description
0404A0E1 3 m (9.84 ft)
Used on the LSUM1DC2400
power module
0404A0E2 15 m (49.21 ft)
AC power cable
AC power cables are used for connecting the power modules of an M9000 gateway to the external AC
power supply system.
• Select AC power cables according to the power of the power module.
• The connector type varies by country or region. Select a compliant connector type as needed.
• For the power module LSUM1AC2500, select 16A AC power cables. For the connector types of
different countries or regions, see
Table 32 .