H3C Technologies H3C Intelligent Management Center - Manual (Page 68)

7-7
Description of the nodes:
z ifIndex: Index of the table. Many other tables reference the data
in the ifTable based on the association with this index.
z ifDescr: Port description.
z ifType: Port type, which is defined in the IANAifType-MIB.
z ifAdminStatus: Management status of the port.
z ifOperStauts: Operating status of the port.
4) ifJackTable, as shown in Figure 7-10, mainly shows the combo
port status. It is associated with the ifTable.
Figure 7-10 ifJackTable
ifJackType shows the port type value. For example, rj45(2) or rj45S(3)
indicates that the electrical port of the combo port is enabled;
fiberSC(8), fiberMIC(9), or fiberST(10) indicates that the optical port
of the combo port is enabled.
The common project defines the following statuses: