Grass Valley 2041RDA - Manual (Page 14)

14 2041RDA Instruction Manual
Configuration
Figure 5. Module Configuration Jumpers
Auto/Bypass Jumper
When the jumper is placed across pins 2 and 3 of jumper block J25, the
detected video signal will be reclocked at the appropriate rate. With the
jumper across pins 1 and 2, all reclocking is bypassed.
8025_06
JP24
JP25
FAULT
COMM
CONF
PWR
REMOVR
SIG_PRES
RECLOCK
Jumper across pins 2–3
selects automatic reclocking
Jumper across pins 1–2
bypasses reclocking function
AUTO
BYPASS
1
CONF –
configuration
processing LED
Auto/Bypass Reclocking
Jumper across pins 1–2 enables
remote and local control
Jumper across pins 2–3
locks out remote control
LOCAL
LOCAL & REM 1
Remote Control Lockout