Grass Valley 8900NET v.4.0.0 - Manual (Page 65)

8900NET Instruction Manual 65
Service
Figure 34. Capture Text Pulldown
7. In the Capture Text window, browse to a location to save the text file as
shown in Figure 35 . Select the Start button. This will capture the text
until you indicate it to stop.
Figure 35. Capture Text
8. On the HyperTerminal screen, Press the Enter key several times to verify
the connection, then enter the LogPrint command shown in Figure 36 .
Figure 36. LogPrint Prompt
9. Press the Enter key to run the log.
10. Once the log has stopped, you may also stop the text capture by
selecting
Capture Text in the Transfer pulldown again and select Stop
( Figure 37 ).
The text file will now contain a record of the last 300 commands
received by the frame.