Grass Valley 8900NET v.4.0.0 - Manual (Page 82)

82 8900NET Instruction Manual
Appendix
6. Start the FTPD.
If the Xitami Web Server (FTPD) is not already running, start it.
a. Click on the Start popup window on the PC.
b. Select PROGRAMS , then INTERNET TOOLS , and click on Xitami Web Server
– 32 bit console ( Figure 49 on page 81 ).
The Xitami Console will open as a DOS window. There will be a log
of events, at least one of which will indicate it is accepting connec-
tions (see
Figure 50 ).
Figure 50. Typical FTPD Console Screen
The IP Address line should actually indicate the IP address of the
PC you are using for the FTP server. This is the IP Address that will
be used to initiate the software update.
The line that verifies that the FTPD is running reads:
ready for FTP connections on port 21