Grass Valley 8920MUX - Manual (Page 34)

34 8920MUX Instruction Manual
Configuration
Newton Control Panel Configuration
A Newton Control Panel can be interfaced to the Gecko 8900 Series frame
over the local network to control 8920MUX configuration and control
parameters.
Note The 8900NET module in the Gecko 8900 frame must be running software
version 3.2.0 or later for proper operation of the Newton Control Panel.
The available control panel controls are listed in Table 5 on page 20 . An
example of the Newton Configurator for the 8920MUX is shown in
Figure 17 .
Note Not all control parameters are available with the control panel.
Figure 17. Newton Configurator Example
Refer to the documentation that accompanies the Newton Control Panel for
installation, configuration, and operation information.