Grass Valley 8949MDA-CFR v.1.1.X User Manual
Page 10
10
8949MDA-CFR/-SFR—Instruction Manual
Introduction
•
In SD input mode:
•
Up to eight reclocked SD (SDI standard) electrical outputs and up
to two reclocked SD optical outputs in the case of 8949MDA-SFR,
•
Up to four reclocked SDI outputs and up to two reclocked SD
optical outputs and up to four composite outputs in the case of
8949MDA-CFR,
•
Auto cable equalization for up to 330m of cable in the case of SD signals
and for up to 125m of cable in the case of HD signals,
•
A range of standard definition or high definition input signal on one
electrical input or optical inputs,
•
Downscaled signals with monitoring quality (embedded audio and
HANC data will be passed on all SDI outputs except for downscaled
HD monitoring outputs),
•
Alarm (signal presence detection) and status management,
•
SNMP and product health monitoring is supported through the
8900NET (Net Card) module with applications such as NetCentral,
•
A fiber optic submodule option providing optical input/output inter-
faces for all models. One of the three different types of single-mode
fiber optic submodules can be used:
•
1310NM-DRL – provides two optical inputs (RX1 and RX2),
•
1310NM-DTL – provides two optical outputs (TX1 and TX2),
•
1310NM-TRL – provides one optical input (RX1) and one optical
output (TX1), and
•
Remote control and monitoring support: web pages, Newton control
panel, NetConfig management system.