Grass Valley 8985FS v.1.3.2 User Manual
Page 33
8985FSP/FS — Instruction Manual
33
Configuration
The header information on each web page includes the following:
•
Model
and
Description
are read-only generated by the module.
•
Frame Location
is defined on the 8900 Series GeckoFlex Frame Configura-
tion web page.
•
Slot
number reports the module’s location in the frame.
•
Input Video Standard
reports the input video type and rate selected on the
System Config web page.
•
Input Video
reports the status of the video input to the module.
•
Output Timing Source
reports the output timing source (Frame Reference
or Input) chosen on the System Config web page.
•
Split Screen
interactive status is reported (
Enabled
or
Disabled
) as set on the
System Config, Color Correction, or Video Proc Amp web pages on the
8985FSP module. Not present on the 8985FS module.
•
Fiber Module Type
is reported in the Status, Video Input, and Video
Output web page headers only.
Web pages with configuration parameters each have a
Defaults
button at the
bottom of the page to allow resetting of default parameters for only that
page. Default values for all parameters are listed in
Web Page Links
The web interface GUI provides the following links and web pages for the
8985FSP and FS modules (
):
•
Status – reports input and output signal status, frame bus communica-
tion status, module status and information, warnings and errors
(
),
•
I/O Config – shows a graphic representation of inputs and outputs to
the module and allows naming of each input and enabling and dis-
abling of signal reporting (
),
•
Video Input – allows selection of the video input source and provides
the status of all sources, including fiber optic submodule option inputs
(
),
•
System Config – select input video line standard, enable color bars test
signal, set output timing source, set Reference Restore parameters, view
phase difference graph, and controls for Split Screen functions
(
),
•
Frame Sync – provides horizontal and vertical timing, loss of signal
controls, Minimum and Multi-Frame delay controls, and a Timing
Status table showing total delay through the module (
),
•
Color Correction – (8985FSP only) provides RGB gain, offset and
gamma correction adjustments and controls for Split Screen functions
(
),