Grass Valley Aurora Browse v.6.5 Installation - Manual (Page 61)

November 1, 2008 Aurora Browse Installation and Configuration Guide 61
Configure M-Series MDI
7. Enter the name of the M-Series server.
8. The default value on the Asset System Dwell Time is 120 seconds.
9. Click Add as a managed device.
10.If adding an additional M-Series MDI, increment the port number, e.g. enter 9141.
The following settings enable transfers. You should add all available transfer targets,
as specified in
“Configuring transfer targets” on page 55 .
11.Under Transfer Servers, click Add .
12.Use the drop-down list to specify the MDI name.
13.Enter the Transfer Server for the MDI selected above.
14.Leave the Public Address field blank.
15.To put changes into effect, start or restart M-Series MDI service on the MDI
Server.