Grass Valley K2 Edge Installation v.4.0.2 - Manual (Page 26)

K2 Edge Installation and Service Manual - document version: 4.0.2 – Page 26
 Go to Channel Configuration > Audio channels: specify audio groups per port
o SDIO1-9
 Single audio group
 Two audio groups
 Three audio groups
 Four audio groups
 Go to Channel Configuration > SDI port misc
o SDIO1
 VBI: Enabled/Disabled
 HBI: Enabled/Disabled
o SDIO2-8
 Key/Fill
 Enable JIP channel: On/Off
 Enable recording channel: On/Off (only visible when license)
 Click Set to save changes, then Activate to activate changes.
12.3 Time settings
 Go to System configuration > Time settings: set the system date and time.
o Current date: yyyy-mm-dd
o Current time: hh:mm
 Click Set to save changes.