Grass Valley iControl XML - Manual (Page 17)

iControl XML Gateway for Control of Miranda Modular Interface Functional Highlights
Miranda Technologies – Confidential Page 17 of 28
5.2.1 Opening a Session
In performing any control and status request on any card, the first step is to establish a communication
session with the card.
•
The XML commands described in this section interface with individual Service Nodes, using
TCP-IP connection through socket port 13000.
Function
Command/XML Command XML
Gateway
Response
telnet 10.10.30.10 13000 ACKTCP
Open a session
with the DEC-
1001 card in Slot
10 of the Densite
frame <openID> m3.icontrol.com_m2_3_Densite_SLOT_10</openID> <ack>
Figure 5.5: Opening a Communication Session with a DEC-1001