Envision Peripherals EN9250 - Manual (Page 12)

EN9250
11
INSTALLATION INSTRUCTIONS (cont)
Height, Tilt, Pivot & Swivel Adjustment
Your monitor features a multi-adjustable stand that will enable it move
110mm up/down (height adjustment), 25 degree forward/backward (tilt
adjustment), 90 degree landscape/portrait (pivot adjustment) and 70 degree
side/side (swivel adjustment). To make an adjustment, grasp the monitor
with both hands on the right and left edge of the casing and move it to the
desired position.
Figure 3
NOTES
•
Do not touch the LCD screen when making the adjustments above. It may
cause damage or break the LCD screen.
•
Do not touch the speaker module when making the adjustments above. It
may cause damage to the speaker module.
•
Careful attention is required not to catch your fingers or hands when
making the adjustments above.
•
In order to use the Pivot function, the included Pivot Software must be
installed. Run D:\PIVOT\START_PIVOT.EXE, where D is the driver letter
for your CD ROM Drive.