Envision Peripherals EN9250 - Manual (Page 8)

EN9250
7
7
INSTALLATION INSTRUCTIONS
INSTALLING & REMOVING THE BASE
Install
Figure 1 - Installing the Base.
INSTALLING THE BASE
1. Set the bottom base on a flat surface.
2. Line up the front of the monitor with the front of the base and press
firmly.
Remove Pin Remove Base
Figure 2 - Installing the Base.
REMOVING THE BASE
1. Never remove the base while the height adjustment lock pin is
installed. Set the monitor standing on a flat firm surface. Remove
the height adjustment lock pin.
2. Set the monitor face down on a padded flat surface. Press the four
clips inward while pushing the bottom base out.