Configuring 3d/video + key – Grass Valley K2 AppCenter v.9.0 User Manual

Page 206

Advertising
background image

A 3D/Video+Key player channel does not support offspeed play greater than 1 or less than -1.
During these offspeed play operations the video is not synchronized between the two video tracks.
However, both video outputs will resync when recued.

Super Out is not supported on a channel configured for 3D/Video + Key.

3D/Video + Key is not compatible with TimeDelay.

One or more 3D/Video + Key channels can be a part of an AppCenter channel gang, but the
“Record/play same clip on all channels of Gang” feature is not available for that gang.

Configuring 3D/Video + Key

This feature is part of the ChannelFlex Suite, which requires the AppCenter Elite license.

1. Open Configuration Manager, click

Channel

, and select a channel tab.

2. For Type, select

3D / Video + Key Recorder

or

3D / Video + Key Player

.

3. If you selected

3D / Video + Key Recorder

, enter names as follows:

a) For Name, enter a name to identify SDI IN1.
b) For Aux Name, enter a name to identify SDI IN2.

4. If you selected

3D / Video + Key Player

, enter names as follows:

a) For Name, enter a name to identify SDI OUT1.
b) For Aux Name, enter a name to identify SDI OUT2.

5. Configure remaining channel settings as appropriate.

206

K2 AppCenter User Manual

29 October 2012

ChannelFlex Suite

Advertising
This manual is related to the following products: