Grass Valley K2 ASI Media Client - Manual (Page 41)

June 10, 2008 K2 ASI Media Client User Manual 41
Performing a Manual Record
NOTE: The Enable audio PID option is enabled if at least one audio PID is selected.
The Enable data PID option is enabled if at least one data PID is selected.
To view the selected PIDs, click Remap.
An estimated total rate for the selected services is displayed. This rate is actually
the sum of the maximum rate of each service at the time of output creation. The
maximum rate of each service is calculated by the video server. An offset is added
to prevent overflow.
4. Define the recording rate and click Finish .
The Manual record is created and an item is added under the selected output drive.
Recorded services are displayed in the output Services view. An overlay indicating
manual recording is added to the bottom left corner of the service.
If several services have been selected, each service is displayed in the Services
view. In this case, of course, all services are recorded.