Grass Valley K2 Summit Client Upgrade Instructions v.8.x Mar.02 2012 - Manual (Page 16)

Reimage K2 Summit/Solo system
Do this task for all (V8x, CPU, 3G1, 3G2) upgrade kits.
Before doing this task, make sure that you have done the following:
• Saved settings using the ssave.bat script.
• Replaced hardware, as supplied by your upgrade kit.
• Reconnected cables.
1. If you have not already done so, connect keyboard, monitor, and mouse.
2. Do the following:
a) Insert the Recovery Flash Drive into a USB port.
b) Restart the machine, or power on if currently shut down.
The machine boots from the Recovery Flash Drive, into a version of Windows stored on the
drive.
A MS-DOS command window opens.
c) When prompted with a list of options, type 2 to select the Acronis option and then press Enter .
The Acronis program loads.
3. In the Acronis main window, click Recovery .
The Restore Data Wizard opens.
4. On the Welcome page, click Next .
5. On the Backup Archive Selection page, do the following:
a) In the tree view expand the node for Removable Disk (D:) . This is the Recovery Flash Drive.
b) Select the image file as follows:
• If your K2 Summit/Solo system has the Type I (Kontron) CPU carrier module, select the
version 2.x image file.
• If your K2 Summit/Solo system has the Type II (ADLINK) CPU carrier module, select
the version 3.x image file.
c) Click Next .
6. On the Restoration Type Selection page, select Restore disks or partitions and then click Next .
7. On the Partition or Disk to Restore page, select MBR and Track 0 and then click Next .
8. On the Disk Selection page, select Disk 1 and then click Next .
NOTE: Verify capacity to make sure you select the boot media card. It has an interface
identified as "IDE (0) Primary Master".
9. On the Next Selection page, select Yes, I want to restore another partition or hard disk drive and
then click Next .
10. On the Partition or Disk to Restore page, select (C:) and then click Next .
11. On the Restored Partitions Resizing page, select Yes, I want to resize partitions and then click
Next .
16 K2 Summit/Solo Field Kit Upgrade Instructions 02 February 2012
Upgrade instructions