Grass Valley K2 Summit Client Upgrade Instructions v.8.x Mar.02 2012 - Manual (Page 35)

Front bezel assembly removal K2 Summit
You can remove the bezel assembly while the K2 Summit system is operating. If you do so, make
sure you replace it within three minutes to ensure that the correct operating temperature is maintained.
To remove the front bezel assembly, proceed as illustrated.
Slide out 2
Loosen thumbscrews 1
CompactFlash boot media removal K2 Summit
Before doing this task, remove the front bezel assembly.
To remove the boot media, proceed as illustrated.
Slide out
Push button 1
2
You must use the CompactFlash boot media provided by Grass Valley. Do not use CompactFlash
media procured elsewhere.
02 February 2012 K2 Summit/Solo Field Kit Upgrade Instructions 35
Upgrade instructions