Configuring time settings, 9 configuring time settings – Grass Valley K2 TX/MAM Server User Manual v.2.4 User Manual
Page 9
Advertising
K2 TX/MAM Server User Manual - document version: 2.4 - Page 9
9 Configuring time settings
On the TX/MAM servers, edit the file /etc/ntp.conf.
Go to:
## Outside source of synchronized time
##
## server xx.xx.xx.xx # IP address of server
Edit the following line: ## server xx.xx.xx.xx # IP address of server
Remove the # hashes.
Specify the NTP-
server’s IP-address.
Example:
## Outside source of synchronized time
##
server 192.33.96.102 # IP address of server
To activate, run the following command: service ntp restart
Advertising
This manual is related to the following products: