Grass Valley Kameleon HD Multi-Function Modules v.2.1.0 - Manual (Page 97)

Kameleon HD Instruction Manual 97
Initial Configuration Process Overview
• SNMP Trap Reporting – this section provides a table showing the pres-
ence and/or status of all frame devices such as modules, power
supplies, power and fan sleds and other frame functions such as fan
and Frame Bus status.
Use the corresponding Report checkboxes to indicate which trap
warnings and alarms you want be reported to the SNMP manager
for the following conditions:
• Faults
• Devices removed
• Signal Loss
• Reference Loss
• Config Error
The enabled SNMP traps will be reported to any SNMP manager
that is identified as an SNMP Report Destination in 2000NET con-
figuration. Trap severity is read-only hard-coded information that
is interpreted and responded to by the SNMP Manager software
configuration.
Refer to the 2000NET Instruction Manual for complete details on using
the 2000NET web pages.