Grass Valley 1200 Installation Planning Guide - Manual (Page 3)

INPUT 1 J1 INPUT 2 J2 INPUT 3 J3
INPUT 5 J5 INPUT 6 J6 INPUT 7 J7
INPUT 9 J9 INPUT 10 J10 INPUT 11 J11
INPUT 13 J13 INPUT 14 J14 INPUT 15 J15
AUX OUT 1 J17 AUX OUT 2 J18 PGM OUT 1 J19
CLEAN FEED J21 PVW OUT J22 PGM OUT 2 J23
PARALLEL INPUT MODULE
O
U
T
P
U
T
S
I
N
P
U
T
S
SERIAL IN
SERIAL OUTPUT MODULE
PARALLEL INPUT MODULE
PARALLEL IN PARALLEL INPUT MODULE
PARALLEL INPUT MODULE
PARALLEL OUTPUT MODULE
SERIAL OUT
Serial and Parallel Component Digital Inputs 1-16
CCIR601 4:2:2 525 or 625 lines
Aux Bus 1 and 2
and Effects Send
Component Digital Outputs
Preview Video
Component Digital Output
Clean Feed Video
(Program without DSK)
Component Digital Output
Program Video
Component Digital
Outputs
1 CLK 2 GND
Parallel Component Digital Video Input/Output
3 D9 4 D8 5 D7 6 D6 7 D5 8 D4 9 D3 10 D2 11 D1 12 D0 13 GND
14 /CLK 15 GND 16 /D9 17 /D8 18 /D7 19 /D6 20 /D5 21 /D4 22 /D3 23 /D2 24 /D1 25 /D0
PARALLEL IN
PARALLEL IN
PARALLEL OUT
System Connections
Console Cutout
27.80 in. (706 mm)
17.46 in. (443 mm)
Wood screws, 10 places,
size #6 (customer supplied)
Important: Install the mounting
brackets on the rear of the
panel using four #6-32
screws. Secure the brackets
to the desk using four #6
wood screws. The mounting
flange at the front is not
capable of supporting
the entire panel.
Panel
mounting flange
Side View
6.05 in.
(154 mm)
1.02 in.
(26 mm)
18.42 in. (468 mm)
19.58 in. (497 mm)
20.22 in.
(514 mm)
1.00 in.
(25 mm)
15.40 in. (391 mm)
5.31 in.
(135 mm)
Console Mount