Grass Valley ASD-272p - Manual (Page 7)

Guide to Installation and Operation
3
3.0 Installation
3.1 Power Supply
The power supplies LKS-WSA and LKS-WSE, for 110 V
and 220 V operation respectively, are used to power the
ASD-272p. Each power supply provides a regulated +5
VDC@750 mA power source. The ASD-272p employs a
mini XLR-3 connector for its power needs. Figure 3
provides a detailed pinout of the male connector.
1 3
2
(male connector-facing)
Pin 1: Shield
Pin 2: GND
Pin 3: +5 VDC
Figure 3: Power connector pinout