Grass Valley ASD-272p - Manual (Page 8)

ASD-272p
4
3.2 Composite Input
Connect a NTSC or PAL, PAL-M, PAL-N, SECAM S-
video signal conforming to the SMPTE 170M or ITU
(CCIR) 624-4 standard respectively to the BNC labeled
S-VIDEO IN.
Figure 4: S-video connector pinout
3.3 4:2:2 Output
The 4:2:2 serial digital output signal is provided by the
BNC labeled 4:2:2 OUT. The 4:2:2 output signal
conforms to the SMPTE 259M-C standard.
1
3
2
(male connector-facing)
Pin 1: Luma
Pin 2: Chroma
Pin 3: Luma ground
Pin 4: Chroma ground
4