Grass Valley T-POV Bidirectional Robotic - Manual (Page 76)

70
Operation of the T-POV System
The T-POV Portable Unit Digital Display
REVD Indicates that the REV for the UBUS board is Revision "D" - Your revision
may differ
DIAGNOSTIC MODE Temperature (TEMP)
A quick push of the SELECT button from REV mode advances to the TEMP mode. This
mode displays the internal temperature (in degrees centigrade) of the Portable Unit.
This mode cycles through the following sequence and may start at any point in the cycle.
TEMP Sequence starts with TEMP to indicate Temperature Display mode
MAIN The Portable Unit MAIN controller board temperature will be displayed
61C Temperature display in Centigrade for Portable Unit main circuit board
Readout Portable Unit Digital Display Activity Explanation