Set-up instructions, Test equipment – Grass Valley LDK 7500 Technical Manual User Manual

Page 29

Advertising
background image

Adjustments

Technical Manual LDK 7500 + LDK 5490 Adapter

4-3

Set-up Instructions

Before carrying out any adjustments the following steps
are recommended:
•

Attach an adapter to the camera.

•

Install the camera on a tripod.

•

Attach the lens and the necessary cables.

•

Allow the camera to warm-up.

CAUTION:

Do not attempt to improve camera performance

by adjusting individual potentiometers, jumpers or switches

as this may lead to complete misalignment of the camera.

CAUTION:

Do not realign individual potentiometers, jumpers or switches

not mentioned in this chapter or earlier in this manual.

These adjustment points are for factory use only.

CAUTION:

Switch off the power supply to the camera

before removing or replacing printed circuit boards.

Test Equipment

The following is a list of equipment required to carry out
the adjustment procedure:
•

Set of board extenders LDK 5820/01

•

Oscilloscope (with cursor measurement)

•

Spotlight 3200K

•

Focus test chart

•

Black hole test chart

•

White PortaPattern test chart

•

White 3200K test chart

•

Waveform monitor

Advertising
This manual is related to the following products: