Grass Valley XSwitch Feb 08 2006 - Manual (Page 30)

30 XSwitch Installation and Operations Manual
Section 4 — Software Setup and Operation
3. Using Function up and Function down, chose Card Setup, then press
SEL
.
The currently displayed rack flashes in the bottom right corner.
4. Using the Data up and Data down, chose Rack 0, then press SEL.
The Slot 1 A icon flashes.
5. Press Function down twice to move the flashing cursor to Slot 3 of the
mode array icons.
6. Press Data down twice to move the flashing cursor to the C icon.
7. Press SEL to change the icon from a light background to a dark
background.
The dark background for Slot 3 icon array C indicates the card will be
in switched state when mode C is selected.
8. The C icons for all other cards should already have light backgrounds,
which indicates they are in unswitched state when mode C is selected.
9. Press ESC twice to return to the Main Page.
RESULTS : Pressing Mode C now causes the SDI card in slot 3 to x-switch
while all other cards are in normal state (unswitched).