Elmo Visual Presenter HV-7100SX - Manual (Page 34)

33
1
2
3
4
5
6
7
8
9
10
11
Preset Operation
Operation status of this product can be stored / read out
in the memory (max. 8 states can be stored). Operation
states that can be stored are as shown below.
• Present zoom angle of view
• The iris state of Auto/Manual selection and its statue.
• White balance status
• On/off of aperture
• Status of gamma
• Lighting status
• Status of color/B&W switch
• Color and shape of the pointer
• Status of image rotation
• On/off of contrast mode
• Status of POSI/NEGA conversion
• Status of F.A.M. selection
• Sound volume
1. How to store
Press the [PRESET.SET] button on the wireless
remote control and press the [MEMORY NO.]
button of the wireless remote control within "4 sec
or less", then the current status of this product is
saved in the pressed number memory.
2. How to read out operation status
Press the [PRSET.CALL] button on the wireless
remote control and press the [MEMORY NO.]
button of the wireless remote control within "4 sec
or less", then this product is set to the memorized
status corresponding to the number.
The preset (stored) status
is maintained even when
the power is turned off.
Wireless remote control
PAUSE
2x
SET PRESET
LIVE
MEMORY
CALL SET IMAGE CALL
LAMP POSI/NEGA COLOR/B&W UPPER BASE
IRIS
AF
NORMAL OPEN CLOSE
TELE ZOOM WIDE NEAR FOCUS FAR
RGB1 RGB2 MAIN MONITOR
OUTPUT