Elmo Visual Presenter HV-7100SX - Manual (Page 35)

Image Memory
Images can be stored in the memory of this Presenter.
(max. 8 sheets)
1. How to store images
Press the [IMAGE.SET] button on the wireless
remote control and press the [MEMORY NO.]
button of the wireless remote control within "4 sec
or less", then the image is stored in the pressed
number.
When the power of the Presenter is turned off, the
images stored in the memory are cleared.
2. How to read out stored images
Press the [IMAGE.CALL] button on the wireless
remote control and press the [MEMORY NO.]
button on the wireless remote control “within
about 4 sec,” then the stored image correspond-
ing to the pressed memory No. is read out.
If the [MAIN] button in the input selection area is
pressed, the camera captured image is displayed
again.
Wireless remote control
34
1
2
3
4
5
6
7
8
9
10
11
PAUSE
2x
SET PRESET
LIVE
MEMORY
CALL SET IMAGE CALL
LAMP POSI/NEGA COLOR/B&W UPPER BASE
IRIS
AF
NORMAL OPEN CLOSE
TELE ZOOM WIDE NEAR FOCUS FAR
RGB1 RGB2 MAIN MONITOR
OUTPUT