Grass Valley RSAT1 - Manual (Page 19)

Satellite Panel RSAT1 4. Operation
14 Operating Instructions - Rev. 3 / 7.2002
4.2 HOW TO LEARN A NEW FUNCTION
The learn mode is activated by pressing the two buttons left and right of the big (16
character) display simultaneously.
Press the buttons simulaneously
The message L e a r n i n g . . . will appear in the display. The
learn mode is deactivated the same way as it is activated (by pressing the two but-
tons).
The message “Learning ...” will disappear then.
4.2.1 Learning buttons
D
Ensure that you are in learn mode.
D
Press the desired button on the Satellite Panel and hold it down.
D
Press the desired button on the DD35 control panel and then release it.
Release the button on the control panel.
D
The successful learning will be indicated by a beep (not yet implemented on
the Satellite Panel).