Grass Valley RSAT1 - Manual (Page 6)

Satellite Panel RSAT1 1. General
Operating Instructions - Rev. 3 / 7.2002 1
1. GENERAL
The remote control panel RSAT1 is used for copying button functions of the DD35
main operation panels for control of mixer functions from another workplace.
Connected to DD35 main panel via RS-422 cable which can be ordered optionally.
Besides single button functions also the built in Digipots as well as the optional Fa-
der can be trained with functions of the DD35 main panel – when the learn mode
is applied.
1.1 APPLICATION EXAMPLES
Remote control on source selection, effects register recall, transitions, macros,
Shot-Box, Keyer adjust ...., specifically in conjunction with the use of an additional
sidepanel control PC.
1.2 CONTROL AND DISPLAY ELEMENTS
D
4x Digipots
D
6x5 Button matrix with LEDs, programmable
D
2x Menu control buttons (Step up/down)
D
1x Display mode button (Name<––>Value)
D
16 Character menu function LEDs
D
4x4 Character LEDs (i.e. 1x per Digipot)
D
Serial connection status display