Polaris 2012 ATV RZR 170 - Manual (Page 29)

26
FEATURES AND CONTROLS
Seats
Driver’s Seat Adjustment
1. Lift the seat latch lever located
under the right front edge of the
driver’s seat.
2. While holding the lever
upward, slide the seat forward
or rearward to the desired posi-
tion, then release the lever.
3. Slide the seat forward and rear-
ward to ensure the latch is
engaged. Before operating the
vehicle, always make sure both
seats are securely installed.
Seat Removal
1. To remove the driver’s seat, lift
the seat latch lever.
2. While holding the lever upward,
slide the seat completely forward
to remove it from the seat
mounting rails.
3. Before operating the vehicle,
always make sure the driver’s
seat is installed and securely
latched.
4. To remove the passenger seat,
remove the two bolts located at
the front of the seat mounting rails. Slide the seat forward to remove
it from the vehicle. Always reinstall the passenger seat before oper-
ating the vehicle. After reinstalling the seat and bolts, torque the
nuts to 10 ft. lbs. (13.5 Nm).
Seat Latch Lever
Slide Seat Forward